I've resurrected the project site as part of Mohawksoft.org (http://linuxpcrobot.mohawksoft.org). A few cool things came out of it. I'm told some of the motor control stuff got used in the player project and the "yield" paradigm I wrote about in 2012 is now part of the Arduino main-line. (Whether it was because of this site or independent development coming up with the same solution would be an interesting study.)

I still have the chassis and may do something with it at some point, it was fun, but it is now hopelessly obsolete. I've let the domain go.

These questions are best answered by answering the unsaid question first: "What is the Linux PC Robot?" It is a hobby robot platform that you can build without a lot of specialized components, with few (if any) specialized programing languages, and that has the ability to do real mobile robotics work, for under $500.

I think LPCR's useful life has come to an end. The Raspberry PI and Arduino are really coming into their own. I believe that using an Intel based platform with ATX power is probably not something you would design today. The LPCR has had a good run, and its been a fun project, but with all things its time to step back and re-evaluate th future.

The message based control path is complete. The network joystick implementation is completely in the joysender program and out of the robot proper. The "planner" concept is obsolete. There is now simply a motor planner that responds to commands. All planning and control is assumed to operate in a separate process on or off the robot system.

Currently, the only way to control the robot or alter its behavior is by a script, pretend to be a joystick, or modify the robot program itself. All of which I have done as needed. I gets pretty tedious and frustrating to do interesting things when you have to modify and recompile a "working" robot program, each and every time, to do something different.

Therefor, what is being done is to scrap the "netstick" networked joystick and move it to a more generic message passing interface. The networked joystick will still work, but it will communicate through the new interface.

I am working on a "design guide" on how to build your own Linux PC Robot and I think something needs to be stated up front. This is not a "small robot." I have nothing against small robots like Lego NXT and Roombas, they are cool.